- Abrasives
- Accessories
- Hardware & Supplies
- Measurement & Marking
- PPE & Workplace Safety
- Equipment & Machinery
- Hand Tools
- Corded Power Tools
- Cordless Power Tools
- Air Tools
ESAB Origo™Mag C201 Welding machine
Nett
The ESAB Origo™ Mag C171, C201 andC251 are step regulated welding power sources for MIG/MAG welding. A built-in wire feeder and the lowweight of the units make them perfect, practical solutions for use on farms, in repair shops and for light production applications.
Power Smoothing Device™
Although Origo™ Mag C171, C201 and C251 are 1-ph units, Power Smoothing Device™ gives them excellent welding performance in CO2 and gas mixtures. Power Smoothing Device™ provides a smooth welding current, comparable to that of a 3-phase machine.
• Power Smoothing Device™ – provides excellent welding performance from a single phase machines
• Easy change of polarity – allows the use of both conventional solid wire and self-shielding cored wire
• Easy setting of welding parameters – welding machines for everyone
• MXL™ Torches – designed to provide the ultimate in convenience and versatility
Applications
• Agricultural applications
• Auto-repair
• Light metal fabrication
• Transport
• Education
• Household and furniture
• Tack welding
MIG/MAG welding
Origo™ Mag C171, C201 and C251 can be used with both conventional solid wire and self-shielding cored wire. They are designed for welding both steel, stainless steel and aluminium as well as for MIG brazing. Wire diameters from 0.6 mm up to 1.2 mm can be used depending on the machine selected.
Easy to use
The units are equipped with multi-step voltage switches and potentiometers for wire speed adjustment, enabling easy setting of the welding parameters. It is possible to adjust burnback time and to set spot welding time in all three OrigoTM Mags. The units are also fan-cooled and equipped with thermal overload protection. As an option the Origo™ Mags can be equipped with V/A digital meter and transformer for a CO2 heater.
| Technical data | Origo™ Mag C171 | Origo™ Mag C201 | Origo™ Mag C251 |
| Mains voltage , V, Hz | 230 1ph 50/60 | 230 1ph 50/60 | 230 1ph 50/60 |
| Fuse, A-slow | 16 | 20 | 35 |
| Auto fuse (MCB) EN 60898 typ D, A |
16* | 20* | 32* |
| Permitted load at | |||
| 20% duty cycle, A | 170 | 200 | 250 |
| 23-30 % duty cycle, A | 155 @ 25% | 185 @ 23% | 200@ 30% |
| 60% duty cycle , A | 98 | 115 | 140 |
| 100% duty cycle , A | 76 | 90 | 110 |
| Setting range (DC) , A | 30 – 170 | 30 – 200 | 40 – 250 |
| Open circuit voltage , V | 22,5 – 44,5 | 19,6 – 44,9 | 19,0 – 41,5 |
| Open circuit power , W | 270 | 120 | 200 |
| Power factor at maximum current | 0,91 | 0,89 | 0,92 |
| Wire feed speed, m/min | 1,0 – 17 | 1,0 – 17 | 1,9 – 19 |
| Wire diameter, mm | |||
| Fe, Ss 0 | ,6 – 0,8 | 0,6 – 1,0 | 0,6 – 1,2 |
| C | 0,8 | 0,8 – 1,0 | 0,8 – 1,2 |
| Al | 1,0 | 1,0 | 1,0 – 1,2 |
| CuSi | 0,8 – 1,0 | 0,8 – 1,0 | 0,8 – 1,0 |
| Burnback time, s | 0,02 – 0,25 (adj.on the PCB) |
0,02 – 0,25 (adj.on the PCB) |
0 – 0,25 |
| Spot welding, s | 0,2 – 2,5 | 0,2 – 2,5 | 0,2 – 2,5 |
| Voltage steps | 8 | 12 | 12 |
| Inductance outlets | 1 | 1 | 1 |
| Polarity change | YES | YES | YES |
| Dimensions lxwxh, mm | 860x 420 x 730 | 860 x 420 x 730 | 860 x 420 x 730 |
| Weight, kg | 59 | 68 | 94 |
| Operating temperature, °C | -10 to +40 | -10 to +40 | -10 to +40 |
| Enclosure class | IP 23 | IP 23 | IP 23 |
| Application classification | S | S | S |
Delivery content:
Origo™ Mag C171/C201; MXL™ 200 3 m (contact tip 0,8) assembled feed roller 0,6-0,8
Origo™ Mag C251; MXL™ 270 3 m (contact tip 1,0) assembled feed roller 0,8-1,0
All units; 3m mains cable with plug, 3m return cable with clamp, gas hose 1,5m, shelf for gas cylinder, attachment chain for gas cylinder,
instruction manual.
| Weight | 68 kg |
|---|---|
| Dimensions | 860 × 420 × 730 mm |
Reviews
There are no reviews yet.